Spot00070.pngInserting bridles

InsertBridle_tool.png 

The Insert Bridle tool is in the Rigging tool set.

The Insert Bridle tool places a bridle object in the drawing. Bridle legs can be inserted on house rigging points and mother grids, and on structural members if this option is enabled when setting the Bridle preferences. Before a bridle is inserted, make sure the necessary rigging points are present in the drawing.

The following modes are available:

Bridle_modes.png 

Mode

Description

Auto Insertion

Inserts the bridle with one click to define the connection point; the legs are automatically inserted on the closest rigging points

Click Insertion

Inserts the bridle with multiple clicks, to define the connection point and each leg insertion point

Deadhang

Inserts a dead hang object, to suspend a load directly below a rigging point.

Dead hang objects can also be inserted with the Insert Dead Hang tool; see Placing dead hang objects.

Two Leg Bridle

Inserts a two leg bridle

Reversed Two Leg Bridle

Inserts a reversed two leg bridle, to connect multiple objects to a rigging point.

To calculate the forces correctly with Braceworks, the objects must be on the same truss system.

Three Leg Bridle

Inserts a three leg bridle

Four Leg Bridle

Inserts a four leg bridle

Stacked Bridle

Inserts a stacked bridle, which is structurally determinate

Trim Height

When Click Insertion is selected in Top/Plan view, enter the distance from the bottom of the bridle to the floor

~~~~~~~~~~~~~~~~~~~~~~~~~

Inserting bridles automatically

Inserting bridles manually

Managing bridle parts

Bridle preferences

Bridle properties

Inserting house rigging points

Inserting mother grids