Spot00138.pngConcept: Schematic views

LightingDesign100139.png 

The Create Schematic View command generates dynamic schematic views of 3D rigging designs. Schematic views show a specified 2D view of rigging and load objects, no matter their orientation or the view settings in the model. From the same design layer geometry, you can create 2D shop drawings and custom 3D model views. For example, create a schematic Top/Plan view of an arched truss system and its attached lights, while using the same model for section viewports.

Schematic views are interactive; schematic rigging and load objects can be moved, rotated, mirrored, and so on. When a schematic rigging object is repositioned, the associated loads move with it and maintain their rotation angles relative to the schematic rigging object.

Schematic loads can also display at an offset, for greater visibility. For example, if lighting devices are attached to the top and bottom of a truss, you can display the under-hung devices above the truss system in the schematic view. Witness lines are drawn to indicate the devices’ hanging points on the truss. Hanging points define where the associated loads are calculated (Braceworks required). Optionally, a footprint can be shown on the schematic rigging object to indicate the space occupied by the load.

To control their attributes and visibility, set the class of witness lines and footprints from the Spotlight preferences: Loads and rigging pane.

LightingDesign100140.png 

The model and its schematic instances are linked. They interact in the following ways:

        In the model or in the schematic view, moving a load’s hanging point on the associated rigging object updates the load’s position in the corresponding view.

        If a load is repositioned in the model, and its schematic equivalent is offset, only the hanging point of the offset load moves on the schematic rigging object. The load’s offset position does not change, but its witness line updates to stay connected with the new hanging point. See Moving schematic loads by control points .

        Moving a schematic load to an offset position does not affect the model.

        Associating or disassociating loads from a model rigging object updates the schematic view by adding or deleting schematic loads.

        Deleting rigging and load objects from the model removes all schematic instances.

        If a model rigging object is deleted, its schematic instances are deleted along with all associated schematic loads.

        Deleting a schematic object does not affect the model parent.

        When Numbering light plot objects, the model objects and their schematic instances are considered to be identical. For automatic numbering, the location of the schematic objects determines the numbering order.

        A schematic lighting instrument shows the 2D label legend of its parent instrument.

Action in model

Result in schematic view

Move a load's hanging point on the associated rigging object

Moves the corresponding load on its rigging object

Rotate a load

None

Move or rotate a rigging object

None

Add a load to a rigging object

Adds a load on the corresponding rigging object in the same relative position as the model

Remove or delete a load

Deletes the corresponding load

Delete a rigging object

Deletes the corresponding rigging object and any attached loads

Number light plot objects

Numbers the corresponding objects

Update a lighting instrument’s 2D label legend

Updates the 2D label legend of the corresponding instrument

When the 3D model is edited, schematic views may not update automatically to reflect the changes; see Updating schematic views  for more information.

Action in schematic view

Result in model

Move a load's hanging point on the associated rigging object

Moves the corresponding load on its rigging object

Move a load to an offset position

None

Rotate a load

None

Move or rotate a rigging object

None

Add a load to a rigging object

None

Remove or delete a load

None

Delete a rigging object

None

Number light plot objects

Numbers the corresponding objects; for automatic numbering, the order is determined by the location of the schematic objects

~~~~~~~~~~~~~~~~~~~~~~~~~

Creating schematic views

Concept: Rigging objects

Concept: Hanging positions

Managing loads

Numbering light plot objects